ClarkDietrich #093 Zinc Control Joint is applied between abutting gypsum panels and is used to relieve stresses of expansion and contraction of drywall and veneer plaster systems in a large ceiling and wall expanses over 30' in length. #093 Zinc Control Joint is typically installed from door header to ceiling, from floor to ceiling in long partition runs, and from wall-to-wall in large ceiling areas. Zinc Control Joints are manufactured from high-quality pure zinc and can be used for interior or exterior applications. The 1/4 in by 7/16 in opening is protected by plastic tape, which is removed after joint compound or plaster has been applied and the finish is completed.

Note: Where fire and/or sound control are required, an approved sealant must be installed behind the control joint. Consult construction documents for details of construction for the control joint assembly.

Features

• Relieves the stress of expansion and contraction
• Zinc for corrosion protection
• Use with drywall or veneer plaster

Specifications

• Material: 0.013 Zinc
• Grounds: 3/32 in
• Length: 10 ft

25 pcs/ctn